Components

Below there are the most typical components commonly used with the OK-VISE products.

DIN 912 bolts

 Code Thread    L (mm) 
DIN912M12X30 M12 30
DIN912M12X40 M12 40
DIN912M12X45 M12 40
DIN912M12X60 M12 60
DIN912M16X60 M16 60
DIN912M16X80 M16 80
DIN912M8X25 M8 25
DIN912M5X25 M5 25

M5, M8, M12 and M16 hex nut bolts are used with the low-profile clamps. Standard hex nut bolts are normally operated with an allen key.

DIN912

 

 

Shoulder bolts

Code  Total L  Positioning L   Dimensions
OKSB12-35  39 mm  23 mm icon pdf
OKSB12-45  45 mm  23 mm icon pdf
OKSB12-65  65 mm  43 mm icon pdf

Shoulder bolts are used for accurate positioning of the components.

 OKSSB12

Gripper pads / M12

 Code 
   Lenght     Head   Max force STEP
 PPB  30 mm  Serrated, tilting 18 kN
 PPB-1  8,5 mm  Serrated, tilting 18 kN  
 PPB-2  17 mm  Serrated, tilting 18 kN  

One family of gripper pads is fastened with M12 thread

PPBPPB

T-slot nuts DIN508

Standard DIN508 T-slot nuts can be used in some T-slot table applications.

Please note that Standard DIN508 T-slot nuts can not be used in Multi-Rail systems.

Code Thread T-slot widht  
DIN508-M8-10 M8 10-15
DIN508-M8-14 M8 14-22
DIN508-M12-14 M12 14-22
DIN508-M12-18 M12 18-28
DIN508-M16-18 M16 18-28

T slot nuts

 

 

 

 

 

 

 

 

 

 

 

Spring guides

bs spring quides

BE-12-18  Bushing
SP-12-P1  Spring guide PLASTIC 12-100 N
SP-12-2  Spring guide 12-100 N
BE-16-25  Bushing
SP-16-P1  Spring guide PLASTIC 16-100 N
SP-16-6  Spring guide 16-200 N
SP-16-7  Spring guide 16-300 N

Assembly tools are also available. For example, SP-AT-16 is used for the D=16 springs.

 Code  STEP
BE-12-18
BE-16-25
SP-12-n
SP-16-n