Grid System modules

As in every OK-VISE Fixturing Concept system, the basic modules in the Grid System are clamp, stopper, side guide and riser block modules. There are fixed and adjustable stoppers in the system, additionally single directional clamp modules share the same base module than adjustable stoppers.

Compared to fixed modules in the Grid system, with adjustable modules the place of the jaw can be moved in 2.5 mm steps.
If the difference in workpiece sizes is larger than the total movement of the jaw, then the  module will be moved 50 mm to the next positioning hole location on the grid platform

Clamp modules, single directional (GCS-)

 Code Dim.  STEP
GCS-DR1
GCS-DR2
GCS-DS1
GCS-DS2
GCS-DS3

In most cases, code format is GCS-sjn, where corresponds to a jaw type (serrated, smooth, diamond). Also other jaw types are available.

gcs ds3GCS-DS3 gcs dr2GCS-DR2

  • Dx1 modules are the shortest, with a jaw movement of max. 35 mm
  • Dx2 possess a jaw movement of max. 85 mm
  • Dx3 possess a jaw movement of max. 35 mm

While Dx1 and Dx2 modules can be installed in 4 directions on a standard 50x50 M12 platform (0,90,180 or 270 degrees) Dx3 modules can be installed in more positions such as 15,65 and 75 degrees in addition to previously mentioned.

Adjustable stopper modules (GS-)

 Code Dim.  STEP
 GS-SA1 icon pdf
 GS-SA2 icon pdf
 GS-RA1 icon pdf

Code format is GS-jAn, where corresponds to a jaw type and is a base type.

GS SA1GS-SA1 gs ra1GS-RA1 GS R2A1GS-SA1R gs sa2GS-SA2

  • xA1 modules are the shortest, with a jaw movement of max. 60 mm
  • xA2 possess a jaw movement of max. 110 mm
  • xA3 possess a jaw movement of max. 60 mm

While xA1 and xA2 modules can be installed in 4 directions on a standard 50x50 M12 platform (0,90,180 or 270 degrees) xA3 modules can be installed in more positions such as 27,45 and 63 degrees in addition to previously mentioned.

Clamp modules, dual directional (GCD-)

 Code Dim.  STEP
GCD-DR1 icon pdf
CGD-DS1 icon pdf

In most cases, code format is GCD-sjn, where corresponds to a jaw type (serrated, smooth, diamond). Also other jaw types are available.

GCD DR1GCD-DR1

Fixed stopper modules (GS-)

 Code Dim.  STEP
 GS-SF1
 GS-SF2

Fixed stopper modules (GS-) are avalable with smooth jaws.

GS SF1GS-SF1 GS SF2GS-SF2

Grid System riser blocks (GP-)

Riser block tabs that posses a M12 thread longer than 18 mm:s, can be also used directly on standard M12 grid platforms.

Grid riser blocks 2 400x400Grid riser block 1

 

 

 

 

 

 

 

 

 

 

Riser blocks used in the Grid System can be built from different standard components. Riser blocks can be placed easily in almost any position on the grid platform. Height can be adjusted by combining suitable riser modules, adjusting the height with the M12 thread and finally machining if needed.

Please specify your needs and we will recommend you a suitable set!

Grid System riser block GP-1

 Code Dim.  STEP
 GP-1 icon pdf

gp 1GP-1

Grid System side guides

Grid side guides 1Some side guides for the Grid System can be built using the same components used for the riser blocks.

Additionally, there are modules to adapt spring guides (in the photo) to the Grid System side guide.

Download the brochure

core 2017 fixturing16