• In English
  • Finnish
  • Svenska
  • По-русски
  • In English
  • Finnish
  • Svenska
  • По-русски

Components

Below there are the most typical components commonly used with the OK-VISE products.

Threaded inserts

The following threaded inserts are used when special durability in the thread is essential.
Especially with aluminum platforms threaded inserts are recommended.

Some inserts are straight – one thread inside and one outside – whereas some have a flange outside to give extra support. Please notice that T-nuts can also be used for the same purpose in some installations.

threaded inserts

In back models with flange: INM-16-10, GS-T1-M
In the front straight models INM-12-8, INM-18-12, INM-18-12H, INM-22-16 (heights 12.5, 10, 16 and 20 mm)

Locator bushing OKPB1220

This is a locator bushing used in many types of platform where OK-VISE components are employed.
See also Threads and positioning holes on platforms

bushing okpb1220

DIN 912 bolts

 CodeThread   L (mm) 
DIN912M12X30M1230
DIN912M12X40M1240
DIN912M12X45M1240
DIN912M12X60M1260
DIN912M16X55M1655
DIN912M16X60M1660
DIN912M16X80M1680
DIN912M8X25M825
DIN912M5X25M525

M5, M8, M12 and M16 hex nut bolts are used with the low-profile clamps. Standard hex nut bolts are normally operated with an allen key.

DIN912

 

 

Shoulder bolts

Code Total L Positioning L  Dimensions
OKSB12-35 39 mm 23 mmicon pdf
OKSB12-45 45 mm 23 mmicon pdf
OKSB12-65 65 mm 43 mmicon pdf
OKSB16-55 55 mm 28 mmicon pdf

Shoulder bolts are used for accurate positioning of the components.

 OKSSB12

Gripper pads / M12

 Code 
   Lenght    Head  Max forceSTEP
 PPB 30 mm Serrated, tilting18 kN
 PPB-1 8,5 mm Serrated, tilting18 kN 
 PPB-2 17 mm Serrated, tilting18 kN 

One family of gripper pads is fastened with M12 thread

PPBPPB

T-slot nuts DIN508

Standard DIN508 T-slot nuts can be used in some T-slot table applications.

Please note that Standard DIN508 T-slot nuts can not be used in Multi-Rail systems.

CodeThreadT-slot widht
DIN508-M8-10M810
DIN508-M8-14M814
DIN508-M12-14M1214
DIN508-M12-18M1218
DIN508-M16-18M1618

T slot nuts

 

 

 

 

 

 

 

 

 

 

 

Spring guides

bs spring quides

BE-12-18 Bushing
SP-12-P1 Spring guide PLASTIC 12-100 N
SP-12-2 Spring guide 12-100 N
BE-16-25 Bushing
SP-16-P1 Spring guide PLASTIC 16-100 N
SP-16-6 Spring guide 16-200 N
SP-16-7 Spring guide 16-300 N

Assembly tools are also available. For example, SP-AT-16 is used for the D=16 springs.

 Code STEP
BE-12-18
BE-16-25
SP-12-n
SP-16-n